Kingfisher KI6102 Series Скачать руководство пользователя страница 1

 

 

Revision 7                                         Date: 22 Jun 2020                                                                                          Page 1 of 13 

User Manual 

KI6102 series PON Power Meter 

 

Warranty: 

Information in this manual is given in good faith for the benefit of the user.  It 
cannot be used as the basis for claims against Kingfisher International or its 
representatives, if accidental damage or inconvenience results from use or 
attempted repair of the equipment. 

This  Kingfisher  International  product  is  guaranteed  against  defective 
components and workmanship for a period of 1 year from the date of delivery, 
unless  specifically  stated  in  the  original  purchase  contract  or  agreement.  
This warranty excludes optical connectors or incorrect use.   

The warranty will be voided if the following instance happens:- 

1) 

Opening the instrument.  

2) 

The instrument has been immersed in water or subjected to extreme 
environmental conditions.  

Liability is limited solely to repair of the equipment. 

 

 

Содержание KI6102 Series














Отзывы: