Kingfisher KI 2300 Series, Руководство по эксплуатации и обслуживанию

Страница: 30 / 74

TEXT ID Tag
KI2000 UM-6
-
28 -
Text ID tag is useful pre-set feature to systematically add text names
to test results in memory.
Note that this instruction does not refer to storing of test results; it
refers to setting up a collection of user defined names that can be
conveniently recalled as needed.
A Text ID tag is formed by 4 letters and a 3 digit fiber index, eg.
ABCD001. The last 3 numbers auto-increment as results are stored.
Up to 20 user-created Text ID Tags can be stored. A new Text ID Tag
can be created or modified while in Meter menu or in AutoTest.
To create a new Text ID Tag

Enter Meter menu.

Press [Toggle centre], then [F4]. You will see a new ID Tag,
AAAA001, with the 1
st
character flashing.

Press [-] or [+] to select new alphanumeric character, then
press [Toggle centre] to move to the next.

Press [F3] to reset the digit fiber index to ‘001’.

To exit with saving, press [Memory].

To exit without saving, press [Home].
To modify an existing Text ID Tag

Enter Meter menu.

Press [Toggle centre], then [-] or [+] to select a stored ID
Tag.

Press [F3], the character to be edited will flash.

Press [-] or [+] to select new alphanumeric character, then
press [Toggle centre] to move to the next.

Press [F3] to reset the digit fiber index to ‘001’

To exit with saving, press [Memory].

To exit without saving, press [Home].
To delete a Text ID Tag

Enter Meter menu.

Press [Toggle centre], then [-] or [+] to select a stored ID
Tag.

Press [F3]. Press [F4].

To exit with saving, press [Memory].

To exit without saving, press [Home].
To use a stored Text ID Tag

Enter Meter menu.

Press [Toggle centre]. ID Tag will flash.

Press [-] or [+] to select.
Each time the tag is used to store data in memory, the last 3 numbers
will auto-increment. This incremented number is also recalled if this
tag is called again, or the instrument is turned on again.