DVD Duplicator Series
©2005 Kingdom, Inc. All rights reserved
Ver: 1.0
Page - 18 of 34
User’s Guide
Chapter 4 Advanced Functions
Testing (Simulating) the Copy Process
The
2.Test
function is used to simulate the copying process. When the simulation (test)
finishes, no data will be written to the DVD.
How to use the
2.Test
function:
1. Use the down arrow button to scroll down to the
2.Test
option.
2. The system will test the source and the target destination. If using the DVD-RW as the
source, put a source DVD into the DVD-RW (top disc drawer) blank DVDs into the
writers. If using a partition on the hard drive, ensure the correct hard disk partition is
displayed. If you use rewritable discs that contain data, the old data will be quickly
erased before simulation.
3. Press
ENT
to start the simulation (test). The LCD panel will display the testing
information and when the test ends, the LCD will show the results.
Testing and Copying DVDs
The
3.Test & Copy
function is used to test the copying process and then actually copy the
source to the destination discs.
How to use the
3.Test & Copy
function:
1. Use the down arrow button to scroll down to the
3.Test & Copy
function.
2. The system will test the source and the target destination and then automatically start
the copy process. If using the DVD-RW as the source, put a source DVD into the
DVD-RW (top disc drawer), and blank DVDs into the writers. If using a partition on the
hard disk, ensure the correct hard disk partition is displayed in the LCD panel along
with the
Test and Copy
function. If you use rewritable discs that contain data, the old
data will be quickly erased before simulation.
3. Press
ENT
to start the test and copy process. The LCD panel will display the testing
information, the copy information, and the results. It will automatically eject the
duplicated DVDs when the process is finished.
Verifying the Target (Duplicate) DVDs
The
4.Verify
function is used to examine if the target DVDs can be read correctly after
copying.
How to use the
4.Verify
function:
1. Begin by copying a Master DVD or data from a partition in the hard drive to a target
