DVD Duplicator Series
©2005 Kingdom, Inc. All rights reserved
Ver: 1.0
Page - 16 of 34
User’s Guide
Selecting a Specific Hard Drive Partition as the Source
This procedure explains how to select a specific partition on the hard drive as the source from
which you will be copying.
1. Turn on the system. Note that the
Copy
function is displayed. If your last operation involved
duplicating from a Master CD in the CD-ROM drive, then the
Copy
function
appears as follows on the left. If your last operation involved duplicating CDs from a hard
disk partition, then the message on the right will be displayed.
2. Use the down arrow button to scroll to the
8. Select
S
ource
function.
3. Press the
ENT
button. Use the up or down arrow buttons to scroll to the hard drive.
4. Press the
ENT
button to make your selection. The LCD panel displays a confirmation of your
selection as shown next:
5. Press the
ENT
button or
ESC
button to display the Select Source function. The
Copy
function will reflect the source as explained in step 1. If you have selected the hard dive as
your source, you must make sure to specify which partition in the hard drive you intend to
use as your source, using the Image function.
6. Use the down arrow button to scroll to the
9. Image
function, and press the
ENT
button to
select the function. Use the down arrow button to scroll to the
Select Image
option. For example:
