DVD Duplicator Series
©2005 Kingdom, Inc. All rights reserved
Ver: 1.0
Page - 12 of 34
User’s Guide
6. Press the
ESC
button two times to return to the numbered functions list. Use the up and
down arrow buttons to set the display to
1. Copy
.
Copying from a Partition on the Hard Drive
This procedure applies only to systems that have a hard drive installed. It explains how to copy
a DVD that has been loaded onto a partition on the hard drive to blank DVDs in all of the
available DVD-RW drives in the system.
1. Turn on the system. Note that the copy command is displayed. Your LCD display should look
like this:
2. Use the down arrow button to display the
8. Select Source
function. Your LCD display
should look like this:
3. Press the
ENT
button, and then press the down arrow key to select the HDD as the source.
For example, your LCD display should look like this:
4. Press the
ENT
button again to confirm that the hard drive is selected.
