Page 9 of 21 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Open Com port:
Click it to open the Comport after choose the correct com port;
Connect:
Click it to connect the device to PC after enter the correct password;
Model Number:
This is model number, will update model number automatically when connect
successfully;
Read Settings:
Click it to read all of the current configuration parameters from the Data Logger;
Save Settings:
Click it to save all of the PC Configurator parameters to the Data Logger;
Load Profile:
Click it to load additional Profile to the PC Configurator;
Export Profile:
Click it to save the present configuration parameters as a profile for next Data
Logger configuration or backup the parameter settings;
Tips:
The Load Profile and Export Profile is very useful while you need to program bulks of Data Logger with similar
parameters. After programmed the first unit then you can export profile to save it, for the second Data Logger then
you can load profile directly to save you time.
Default:
Click it to recovery the parameters to factory defaults;
Reboot:
Click it to reboot the data logger;
Help:
Click it to the help page;
RefCom:
Click it to refresh the com port;
Device ID:
(0~65535) non-necessary. This is mainly for monitoring center to identify the data logger,
if the application no needs to identify the data logger, and then no need to fill in it;
Device Description:
This is the description of the data logger, e.g.: installation address, usage
instructions and so on;(Max: 60 Characters)
Add Timestamp to Alarm SMS:
Tick it stands for while alarm occurrence, the Alarm SMS will
include the data logger’s current time information at the SMS Content.
Arm automatically when Power On:
Tick it stands for once the data logger powered up, the data
logger will enter into Arm Mode automatically.
Auto Arm after Disarmed:
Fill the timeout to enter into Armed Mode automatically after disarmed
operation. This is usefully for security protection applications.
Tips:
Arm:
Under this mode, any alarm occurrence will send SMS and dial the authorized numbers immediately. And
execute the programmed I/O outputs.
Disarmed
: Under this mode, alarm occurrence will not send SMS & dial the authorized numbers.
Read Device Time:
Click it to read the device time.
Set Device Time:
Click it to save the time into the device after adjust the time.
(Left-Click to set Hour, right-click to set Minute, Ctrl key restricts to 5 minutes)
Change Password:
Click it to change a new password. (4 Digits, Arabic numerals only)
Device Version:
Click it to read the Model No./Firmware Version/IMEI Code/Signal Value;
