![background image](http://html1.mh-extra.com/html/king-pigeon/s264/s264_user-manual_1969930007.webp)
Page 7 of 21 King Pigeon Hi-Tech. Co., Ltd. Ver 1.0
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
6. Initialize/Reset the GSM unit
The Unit can be reset to factory default once mistake programmed. Please follow below steps to initialize it. After
initialized, the parameters will set as factory default.
1)
Switch off the Unit
2)
Press and hold the RESET button;
3)
Switch the Power Switch to ON side to powered on the Unit, holding 5 seconds, then loose the RESET Button.
4)
Restart the unit then recovery to factory default settings, and will enter to work mode.
7. Settings&Operation
The GSM SMS GPRS 3G 4G Temperature &Humidity Monitoring Alarm is user-friendly design. The user can setup it
or export historic data by the PC Configuration through USB cable, and upgrade firmware by USB port. The GSM
SMS GPRS 3G 4G Temperature &Humidity Monitoring Alarm also can be configured some basically parameters by
SMS Commands or Android APP and IOS APP, please refer to
Chapter 8.
Tips!
1) Please insert the SIM Card firstly, and install the GSM/3G/4G Antenna, please power on to check the
LEDs status according to above mentioned LED Definitions, keep switch on it during the programming.
2) The PC Configuration in the CD, please click it to run it. Also can download from
www.GPRS-M2M.com
under S264/5/6 page directly.
Below is the steps to setup the parameters by PC Configuration, please follow it step by step.
Start to Configure:
Step1: Install the Configurator
The Configurator in the CD or download from
www.GPRS-M2M.com
, then installs it on the computer.
Step2: Connection
Please insert the SIM Card, and install the GSM/3G/4G Antenna.
Step3: Connect the RTU to the PC by USB Cable. And connect the external DC Power to DC Power
Ports, Power on, and switch on the device, see below:
Step4: Install USB Drvier
Install the USB Driver to the computer from the CD firstly. When successful, it can be found out at
the device manager of the XP or Windows 7 or Win8/Win10, please see the below photo. Also, the
driver for different OS can be downloaded from Silicon Laboratories, Inc.
http://www.silabs.com
, the
model is CP210x.