13
EN
1.
General warnings
1.1 -
Safety warnings
WARNING!
This manual contains important instructions and warnings for
personal safety.
An incorrect installation can cause serious injury. Before starting work
it is necessary to carefully read all the parts of the manual. If in doubt,
suspend the installation and request clarification from the King-Gates
Support Service.
WARNING!
According to the most recent European legislation, the
construction of a door or an automatic gate must comply with
the provisions of Directive 98/37/EC (Machinery Directive) and
in particular, the EN 1244, EN 12453, EN 12635 and EN 13241-1
5 standards which allow stating the alleged compliance of the
automation.
In consideration of this, all product installation, connection,
testing and maintenance operations must only be carried out
by qualified and competent technicians!
WARNING!
Important instructions: keep this manual for the possible
future maintenance and disposal of the product.
1.2 -
Installation warnings
• Before starting the installation, check whether this product is
suitable for automating your gate or door (see chapter 3 and the
"Technical characteristics of the product"). If it is not suitable, DO
NOT proceed with installation.
• Install a disconnecting device in the system power supply network
with a contact opening distance that allows complete disconnection
in the conditions stated by overvoltage category III.
•
All installation and maintenance operations must be carried
out with the automation disconnected from the power supply.
If the disconnecting device from the power supply is not visible from
the place where the automatism is positioned, before starting work
it is necessary to attach on the disconnecting device a sign with the
inscription "WARNING! MAINTENANCE IN PROGRESS ".
• During installation, handle the automatism with care, avoiding
crushes, shocks, falls or contact with liquids of any kind. Do not
place the product near heat sources or expose it to open flames. All
these actions can damage it and cause malfunctions or dangerous
situations. If this happens, immediately suspend the installation and
contact King-Gates Customer Service.
• Do not make changes to any part of the product. Unauthorized tam-
pering can only cause malfunctions. The manufacturer declines all lia-
bility for any damages deriving from arbitrary changes to the product.
• If the gate or the door to be automated is equipped with a pedestrian
door, the system must be set up with a control system that inhibits
the operation of the motor when the pedestrian door is open.
• Check that there are no points of entrapment with fixed parts when
the gate leaf is in the maximum opening position; protect these parts
as required.
• The wall control panel must be positioned in view of the automation,
away from its moving parts, at a minimum height of 1.5m from the
ground and not accessible to the public.
• The packaging material of the product must be disposed of in full
compliance with local regulations.
1.3 -
Use warnings
• The product should not be used by people (including children) with
physical, sensory or mental disabilities, or lacking the necessary ex-
perience or knowledge, unless they are supervised by someone re-
sponsible for their safety, or have been fully trained on its use.
• Children playing nearby the automation system should be kept un-
der constant supervision to prevent them from tampering with it.
• Do not let children play with the fixed controls. Keep remote control
devices away from the reach of children.
• When cleaning the surface of the product only use a soft damp
cloth. Only use water, without detergents or solvents.
