King-Dome 9754-LP, Инструкция по установке и эксплуатации

Страница: 30 / 40

SECTION 5
OPERATION
IMPORTANT: There must be a clear “line of sight” to the southern sky. Mountains, buildings, trees,
telephone poles, etc. can all block the satellite signal from reaching the dish.
The distance driven since last performing a search may affect how long it takes for the
King-Dome to find the satellite.
This King-Dome is factory ready to receive available HDTV programming from DIRECTV
Ku band satellites at 101° and 119°. This King-Dome will also receive available HDTV
programming from the DIRECTV Ku band satellite at 110°, but must include a properly
installed HD converter accessory #9748. It will not receive channels broadcast from
DIRECTV’s Ka band satellites at 99° and 103°.
Satellite TV and receiver technology are constantly changing. If you experience difficulty
go to www.kingcontrols.com or contact the King Controls Service Department at
(800) 982-9920, ext. 373.
1. Turn on TV and Receiver. “Searching for Satellite” or similar will appear on TV screen.
2. On King-Dome controller, press and hold
ON/SEARCH for 3 FULL SECONDS .
Power light turns steady GREEN.
a) flashes a variety of colors
for about 30 seconds
b) RED-flashing
c) GREEN-flashing (may start
flashing RED again)
d) GREEN-steady
unit performs self-diagnostic
search in progress
potential satellite found
satellite(s) found and search is complete
STATUS LIGHT SYSTEM STATUS
STATIONARY SEARCH
3. When the status light is steady green, select a channel or the program guide to view your
programming. Enjoy! (DO NOT TURN THE KING-DOME OFF IF USING THE
AUTOMATIC SATELLITE SWITCHING FEATURE.)
Page 28
Note: If the status light is steady GREEN and your programming does not appear, press the reset button on your
DIRECTV receiver. If using Dish Network, hold the receiver power button in for 10 seconds to reset your
receiver. Consult your receiver owner’s manual for further details. (Note that it may take several minutes
for the guide to re-download.)
When receiver reset is complete and the guide is downloaded, select a channel or the program guide to
view your programming.