King-Dome 9754-LP, Инструкция по установке и эксплуатации

Страница: 12 / 40

Page 10
INTERNAL WIRING
15. Choose your desired wiring configuration:
Dish Network / ExpressVu / DIRECTV
(single satellite or auto switching from master receiver only)
Fig. 11, Page 11
DIRECTV
(auto switching from any receiver)
Fig. 12, Page 12
16. Inside the vehicle, make the connections as shown in the wiring diagrams, keeping in
mind the following important points:
a) The connection between the dome unit and the receiver must be a direct
connection with no devices in between.
b) Power connection must be a non-shared circuit. Excessive current draw on the
circuit will cause the unit to operate improperly. Power and ground connections must
be made after the wires are connected to the dome unit.
c) If fusing the circuit, the fuse must be rated at 7.5 amps.
17. When installation is complete, go to Section 4, ANTENNA CONFIGURATION on
page 13.