King-Dome 9754-LP, Инструкция по установке и эксплуатации

Страница: 19 / 40

Page 17
DIRECTV ANTENNA CONFIGURATION
Single Satellite 101
1. On the King-Dome controller, press and release the
ON/SEARCH button. Wait for the status light to flash
orange, and then
WAIT 4 MORE SECONDS .
2. Press and release the ON/SEARCH button 16 times.
The status light starts rapidly flashing green and red.
3. Press and hold the TRACK button for 4 seconds.
The status light will turn orange for 1 second,
and then start flashing green or red.
4. Press OFF.
5. Set your receiver for round dish-1 satellite (do this through the receiver’s
satellite set-up menu screens). Configuration is complete. Go to page 28.
DIRECTV Plus (satellites 101, 119 or 101, 110, 119)
1. On the King-Dome controller, press and release the
ON/SEARCH button. Wait for the status light to flash
orange, and then
WAIT 4 MORE SECONDS .
2. Press and release the ON/SEARCH button 8 times.
The status light starts rapidly flashing green and red.
3. Press and hold the SATELLITE PAIR button for
4 seconds. The status light will turn orange for
1 second, and then start flashing green or red.
4. Press OFF.
5. Set your receiver for oval dish-2 satellites (101, 119) or oval dish-3
satellites (101, 110, 119) (do this through the receiver’s satellite set-up
menu screens). Configuration is complete. Go to page 28.
The King-Dome is factory pre-set for the DIRECTV 101 satellite. Unless the antenna has been configured
for another option since leaving the factory,
PERFORM STEP 5 ONLY .