King-Dome 9754-LP, Инструкция по установке и эксплуатации, Страница: 15 / 40

Page 13
SECTION 4
ANTENNA CONFIGURATION
The King-Dome is factory pre-set for DIRECTV standard digital programming broadcast from the
101° W satellite.
If you also receive your local channels from DIRECTV’s 119 satellite or if you subscribe to Dish
Network or ExpressVu programming, you must re-configure the antenna to work with your
satellite service. Doing this will allow the King-Dome to lock on the correct satellites to receive
your programming and also enable automatic satellite switching via the receiver’s remote control
for multi-satellite service.
Antenna configuration is a one time procedure that MUST BE COMPLETED before using your
King-Dome antenna.
To configure your antenna, follow these steps:
1. SATELLITE SERVICE OPTIONS
Determine the service you want to program (pages 14-15).
2. ANTENNA CONFIGURATION
Configure the antenna for the service you chose in step 1.
You can use either:
A) the supplied handheld or wall mount controller (page 16).
B) the diagnostic keypad (page 23).
3. DISH AND EXPRESSVU CHECK SWITCH PROCEDURE
For all Dish Network and ExpressVu services:
Configure your receiver for mobile use by running a check switch (page 26).
#1844
Diagnostic Keypad