29
7.3.2 Set CEC control
Command
Function
Feedback/Example
CECON.
Enable CEC
OPEN CEC FUNCTION!
CECOFF.
Disable CEC
CLOSE CEC FUNCTION!
GCECSTAUS.
Report CEC state
CEC FUNCTION IS OPEN!
TVON.
Turn on display (e. g. TV)
CEC TV POWER ON!
TVOFF.
Turn off display (e. g. TV)
CEC TV POWER OFF!
7.3.3 RS232 control settings
Command
Function
Feedback/Explanation/Example
R[X]:XXX
When detecting a trigger signal, automatically
send ASCII command XXX to the third-party
device (e. g. projector) whose baud rate is X.
R3:123abc
Send the ASCII command “123abc”
to the third-party device whose
baud rate is 9600.
RS232ON/-[X]:XXX
When detecting a triggering signal, automati-
cally send HEX command XXX to the third-party
device (e. g. projector) whose baud rate is X.
RS232ON/-3:30 31 32
Send the HEX command “30 31 32”
to the third-party whose baud rate
is 9600.
X
Baud rate
1
2400
2
4800
3
9600
4
19200
5
38400
6
57600
7
115200
GNOIRDLY.
Report the delay time of SYSTEM OFF when the
controller detects no IR sensor signal.
DETECT NO IR DELAY TIME 300S!
G5VORTMDS.
Report the detection method of input source.
5V/TMDS
DETECT INPUT SOURCE USE 5V!
