32
7.3.5 Front panel IR learning
Besides confi guring IR control by RS232 commands those can be learned from IR remote directly by using
the SET button on the front panel.
Please proceed according the steps below to learn IR commands from IR remote:
Step 1:
• Press SET
to choose DISPLAY ON or DISPLAY OFF command to be set.
• DISPLAY ON LED:
Flashing indicates that DISPLAY ON mode is selected.
• DISPLAY OFF LED:
Flashing indicates that DISPLAY OFF mode is selected.
Step 2:
Point the IR remote to the SENSOR and press the respective button on the IR remote.
Step 3:
The DISPLAY ON or DISPLAY OFF LED will stop fl ashing and remain lit to indicate that IR command has
been learnt.
Step 4:
Press and hold the SET button for 5 seconds to learn user-defi ned IR command. Both DISPLAY ON and
DISPLAY OFF LEDs are fl ashing. Repeat step 2, both LEDs will stop fl ashing and remain lit to indicate that
IR command has been learnt.
Step 5:
The IR learning mode will self-terminate after 10 seconds of inactivity. Both LEDs will expire.
7.3.6 Relay control settings
Command
Function
Feedback/Explanation/Example
RELAY1COT:[XXX].
Set the Relay 1 dwell time to XXX (default 10s =
010, range of 3 to 180s).
RELAY1COT:010.
Set RELAY 1 dwell time to 10S.
RELAY2COT:[XXX].
Set the Relay 2 dwell time to XXX (default 10s =
010, range of 3 to 180s).
RELAY2COT:010.
Set RELAY 2 dwell time to 10S.
GRELAY1COT.
Report Relay 1 dwell time.
RELAY 1 TIME DELAY TIME 10S!
GRELAY2COT.
Report Relay 1 dwell time.
RELAY 2 TIME DELAY TIME 10S!