Kind MCX 124, Руководство пользователя

Страница: 16 / 16

MCX models Specifications
In line with development policy specifications may change without future notice. We made our best to guarantee the information accuracy included on this publication, the
A&AG S.r.l. doesn’t undertake responsibility for mistakes or imprecisions.
Copyright © 2014 A&AG S.r.l. All rights reserved.
Item no. UM_MCX_V02
KIND is a trademark of
A&AG S.r.l.
Via Montello, 19 - I-28066 Galliate (NO) ITALY
Tel. +39 0321865271 - Fax +39 0321861674
e-mail: info@kindaudio.com
www.kindaudio.com
Model MCX 84 MCX 124 MCX 86 MCX 126
Number of channels 4 4 6 6
Power Output Per Channel1)
16 ohms
per ch. (all channels driven) 30 W 50 W 30 W 50 W
8 ohms per ch. (all channels driven) 50 W 90 W 50 W 90 W
4 ohms per ch. (all channels driven) 80 W 120 W 80 W 120 W
Power Output Bridged1)
16 ohms
per ch. 100 W 180 W 100 W 180 W
8 ohms per ch. 160 W 240 W 160 W 240 W
Performance
THD+N 20 Hz - 20kHz for 1 W @ 4 ohms <0.05% <0.05% <0.05% <0.05%
THD @ 1 kHz 1dB below clipping @ 4 ohms <0.1% <0.1% <0.1% <0.1%
Signal to Noise Ratio >106 dB >106 dB >106 dB >106 dB
Frequency Response (1 W @ 8 ohms) +0/-1dB 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz
Damping Factor @ 8 ohms load, 10 Hz to 200 Hz >200 >200 >200 >200
Output Slew rate @ 8 ohms (input fi lter bypassed) 20V /uS 20V /uS 20V /uS 20V /uS
Input Impedance Balanced / Unbalanced 20k / 10kOhm 20k / 10kOhm 20k / 10kOhm 20k / 10kOhm
Input CMRR >50 dB >50 dB >50 dB >50 dB
Gain and Level
Input Sensitivity @ 4 ohms +/- 3 % 0.775 V 0.775 V 0.775 V 0.775 V
Input Gain 27.3 dB 29 dB 27.3 dB 29 dB
Level Adjustment (per channel) Front panel potentiometer, 21 pos. stepped gain from -80 to 0 dB
Front panel Indicators
Per channel Active (unit power on); Signal output -30 dB; Clip / Limit;
Connectors and switches
Input connectors (per channel) Balanced: XLR/Female; pin 2 positive
Output connectors (per two channels) 4-pin detachable Europlug (Phoenix)
Output bridge mode per two channels A+B - ch. A is signal input source and pot. A is level control
Rear panel 4 position DIP switches per two channels Ch. A / B Limiter on; Ch.’s A+B Link on, Stereo/Bridge on; Ch.’s B+C Link on
Internal 3 position DIP switches per channel Full range on, Low Pass Filter on (100 Hz - 18 dB/oct), High Pass Filter on (100 Hz - 18 dB/oct)
Power (on/off) Switch on front panel
Output Circuitry / Design Topology I.C. Class AB I.C. Class H I.C. Class AB I.C. Class H
Power Supply Linear power supply with toroidal transformer
Cooling Convection system
Amplifi er and Load Protection Short circuit, open circuit, thermal, RF protection. On/off muting, clip limiter
Power
Operating voltage (selectable inside the unit) Nominal 115V AC (92-132V AC) - 50/60 Hz, min. power up voltage 85 V; or nominal 230V AC (184-264V AC) - 50/60 Hz, min. power up voltage 170 V
Current draw @ 230 V AC 1/8 power 4 ohms 0.8 A 1.0 A 1.1 A 1.4 A
Current draw @ 230 V AC 1/3 power 4 ohms 1.6 A 2.0 A 2.3 A 3.0 A
Current draw @ 230 V AC, idle 0.1 A 0.1 A 0.1 A 0.1 A
Soft start / Inrush current draw @230 V AC Yes / max. 2 A
AC cordset 230 V CE: 16 A, CEE7; 115 V ETL: 15 A, NEMA-15
Dimensions (W/H/D) W: 483 mm (19”), H: 88.9 mm (3.5” - 2 RU), From front mounting rails D: 391 mm (15.4”)
Weight - Net / Shipping 7 kg (19.8 lbs.) / 10 kg (26.4 lbs) 7.5 kg (24.2 lbs) / 10.5 kg (30.8 lbs) 8.5 kg (24.2 lbs) / 11.5 kg (30.8 lbs) 9 kg (28.6 lbs) / 12 kg (35.2 lbs)
Approvals CE EN55103-1 (Emissions), EN55103-2 (Immunity), EN60065, Class I (Safety)
Note 1) EIA 1kHz - 1% THD @ 230 V AC
All specifi cations are subject to change without notice.