Kimo DB300/1 Скачать руководство пользователя страница 72

Страница: 72 / 80

S2 / S3 / S4:

these screens regroup the current magnitude results which will be stored in the memory at the end of the measurement.

The filters by third octave from12.5 Hz to 20 kHz (class 1) or from 25 Hz to 10kHz (class 2) are listed on the three successive screens.

Note:

The A,C, Z weighted values and LCpk peak pressure are kept at the top of each screen.

➢

Read the different values according to the choice

: global – Max - min

•

Global:

weighted and filtered equivalent continuous levels of the current measurement.

•

Max:

maximum weighted and filtered equivalent continuous levels reached since the measurement start (DI basis)

•

min:

minimum weighted and filtered equivalent continuous levels reached since the measurement start (DI basis)

S5:

this screen reminds the general format of the measurement session.

•

Date of measurement start

•

Date of measurement end: not informed because the measurement is still current

•

Measurement duration: current

•

1/3 oct measurement mode

: Mode

•

Filters by third octave bands from 12.5 Hz to 20 kHz (class 1) or from 25 Hz to 10kHz (class 2):

•

Elementary integration time for LXeq:

•

Frequency weighting of the peak pressure level:

Lpk

•

Audio record:

Audio

18.1.4 Stop the measurement

➢

Stop the measurement by pressing the

icon.

➢

Confirm with

OK.

The measurement really stops only after confirmation with

Note

: At the question

STOP?

, you can press the

Escape key to go back to the measurement screens and

continue.

Note

: You can not stop the measurement if the first elementary integration time is not achieved (ex: DI = 60 s).

Pressing

stop is inoperative.

Options

LCpkmax
LAeq
LCeq
LZeq
12.5 Hz
16 Hz
20 Hz
25 Hz
31.5 Hz
40Hz
50Hz
63Hz
80Hz
100Hz
125Hz

101,3  dB
65,7  dB
68,4  dB
69,7  dB
54.6  dB
55,7  dB
54,4  dB
46,5  dB
42,7  dB
41,4  dB
43,5  dB
44,7  dB
43,4  dB
46,1  dB
54,4  dB

global

LCpkmax
LAeq
LCeq
LZeq
160 Hz
200Hz
250Hz
315Hz
400 Hz
500Hz
630Hz
800Hz
1.0kHz
1.25kHz
1.6kHz

101,3  dB
65,7  dB
68,4  dB
69,7  dB
49.6  dB
51,7  dB
55,4  dB
58,5  dB
55,7  dB
57,4  dB
54,5  dB
46,7  dB
48,4  dB
51,1  dB
44,4  dB

global

LCpkmax
LAeq
LCeq
LZeq
2.0kHz
2.5kHz
3.15kHz
4kHz
5kHz
6.3kHz
8kHz
10kHz
12.5kHz
16kHz
20kHz

101,3  dB
65,7  dB
68,4  dB
69,7  dB
41.6  dB
51,7  dB
48,4  dB
39,5  dB
35,7  dB
35,4  dB
35,5  dB
30,7  dB
24,4  dB
16,1  dB
13,4  dB

global

1/3 oct.

12.5Hz -20kHz

1 s

Non

Départ

Fin

Durée

Mode

Lpk

Audio

15/05 09:15

-------

--------

15/05 13:15:45

STOP

S11 ?

Содержание DB300/1

















































































Результаты поиска

Содержание DB300/1

Отзывы:

Бренды по названию

Популярные бренды

Kimo DB300/1, Руководство пользователя

Результаты поиска

Содержание DB300/1

Отзывы:

Бренды по названию

Популярные бренды