In case of incompatibility:
•
KO
is displayed instead of
OK:
in this case, empty the memory of the instrument.
•
If the
power adapter logo blinks
, it is imperative to use a power adapter.
•
When the logo stops blinking, it means that the power adapter is connected.
8.4.1
Delayed mode: Tim. – waiting for measurement
The principle of a free delayed measurement or of a repetitive daily delayed measurement requires a temporal
management of the instrument:
•
The programming has been prepared and validated
•
A screen displays the waiting mode. This screen is displayed a few moments then it turns off.
•
The instrument is in sleep mode to save battery capacity. It is reactivated a few moments before the measurement.
•
The measurement is performed, data are stored, the instrument activates its sleep mode until the following measurement and
so on.
Screen details:
Important:
it is possible at any time to stop the waiting mode or the sleep mode and launch the measurement.
In waiting mode:
just press the key. The measurement starts immediately.
In sleep mode:
➢
Press
on/off
key to reactivate the instrument.
The waiting screen is displayed.
➢
Press key to start the measurement.
In all cases, there is only the launching of measurement that is modified, programming of end and daily repetitive remain the same as
the ones initially scheduled.
8.4.2
Delayed mode: Tim. – interrupt the programming
It is possible to interrupt at any time the waiting or sleep modes and stop the current mode.
In waiting mode:
➢
Press
Esc key.
The screen of timer exit is displayed.
➢
Select
Yes
with the arrows then press
OK.
In sleep mode:
➢
Press
on/off
key to reactivate the instrument.
The waiting screen is displayed.
➢
Press
Esc key
. The screen of timer exit is
displayed.
➢
Select
Yes
with the arrows then press
OK.
The programming is canceled and the instrument backs to
the screen of initial measurement.
Modes of measurement launching
39
/
:
/
:
Mém. : KO
Alim.:
Début
15
05
09
15
Fin
OK
DIFF.-JOUR.-REPET.
16
05
06
30
5
Repet.
10:43:19
01
Attente
départ
27/06/2012
12:42
Number of remained programmed
measurement (here 1)
Date and time of starting for the
next measurement
Current time
timer
exit ?
Oui
Non
timer
exit ?
Oui
Non
Yes
89,1
LpK
C
dB
0.5s
.
88.7
61.4
-------
-------
dB
dB
01s
Man.
LAeq
LCeq
dB
dB
T = 00/00:00:00
LAeq,T
LCeq,T
