Kimo CPE 300, Руководство пользователя, Страница: 13 / 32

6. Analogue output management
6.b - Analogue output settings
With this function, you can modify the measuring range of the transmitter, and you can equate the new limits to the
analogue output (0-10V or 4-20mA).
You can enter the measuring range required on your own !
Entrer en mode configuration (cf. page 5). Le numéro de dossier affiché
correspond au dernier dossier de configuration utilisé.
Select the folder “
300
” and validate with .
Minimum of output
Select sub-folder “
301
” and validate with .
The cursor
>
returns to the input line.
With and keys, select the minimum limit value and validate with .
Note : in the left column, you can have either a integer (from 0 to 9) or a
negative sign for a negative minimum limit.
Etape
!
You must enter the values according to the units of measurement selected, not
according to the measuring range of the transmitter.
Ex. on a CPE 303 pressure transmitter (0 to ±1000 Pa) with a reading in mmH2O, the minimum and maximum ranges must
be configured on measuring range of 0 to ±102 mmH2O. See conversion chart on following page.
6
Step
The cursor
>
goes to sub-folders line.
• press twice to return to reading mode.
• press once to return to another folder selection.
• with and keys you can choose another sub-folder from the folder 300.
After an analogue output setting, if the unit of measurement is modified (see page 5), you have to reconfigure the
outputs according to the new unit of measurement.
!
Nous préconisons un delta entre le minimum et le maximum
> 5% de l’étendue de mesure
dbu
o
s
M
602
Page 10
1
Step
2
Step
3
Step
4
Step
5
Step
Maximum of output
Select sub-folder “
302
”and validate with .
The cursor
>
returns to the input line.
With and keys, select the maximum limit value and validate with .
Note : in the left column, you can have either a integer (from 0 to 9) or a
negative sign for a negative maximum limit.
dbu
o
s
M
604
CPE 300 transmitter configuration via remote control / Modbus