Kimex 163-4335, Руководство пользователя

Страница: 46 / 70

English - 45 -
PICTURE COMMANDS
Command Description Parameter Return
FREEZE Freeze/Unfreeze no parameter
#*Video is frozen
or
#*Video is unfrozen
ENERGYSAVING
Set energy saving
mode. (if enabled from
profile)
Set energy saving mode. (if
enabled from profile)
#*setEnergySaving() set to n
or
#*Wrong parameter entered
GETENERGYSAVING
Get energy saving
mode. (if enabled from
profile)
no parameter #*The energy saving mode is ...
POWERSAVE
Set power save mode. str-int n (n = ON, n = OFF)
#*set Power save mode to ON,
backlight to its default value
or
#* Power save mode can not set
to ON, because its default value
is OFF
or
#*set Power save mode to OFF,
set to last backlight mode
GETPOWERSAVE Get power save mode no parameter
#*Powersavemode is ON
or
#*Powersavemode is OFF
SETBACKLIGHT
Set backlight pin
status.
str-int n (n = ON, n = OFF)
#*setBacklight port to ON
or
#*setBacklight port to OFF
BACKLIGHTDIM
Set backlight dimming
level. (if enabled from
profile)
str-int n (n = low, high, off) #*setBacklightDimming() set to n
SETBACKLIGHTLEVEL Set backlight level. int n (0 ≤ n ≤ 100)
#*Backlight level set to n
or
#*NACK
GETBACKLIGHTLEVEL Get backlight level. no parameter #*The backlight level is ...
BLUEBACK
Set bluebackground
state.
int n (0 = OFF, 1 = ON) #*set bluebackground state to n
COLOURTEMP
Set colour
temperature.
str-int n (n = normal, warm,
cool)
#*setColourTemp() set to n
GETCOLOURTEMP
Get colour
temperature.
no parameter #*Colour temp is ...
GETPICTUREMODE Get picture mode. no parameter
#*Picture Mode is ... for current
source
PICTUREMODE Select picture mode.
TV ----> int n (1 = dynamic,
2 = natural, 3 = cinema, 4 =
game, 5 = sport)
Signage ----> int n (1 =
signage, 2 = natural, 3 = text,
4 = game, 5 = sport)
#*setPictureMode() set to n
or
#*Incorrect picture mode
parameter entered
GETCONTRAST
Get picture contrast
value.
no parameter #*THE CONTRAST VALUE : ...
SETCONTRAST
Set picture contrast
value.
int n (0 ≤ n ≤ 100)
#*Picture contrast value is set to n
or
#*Same value is set. Do nothing.
or
#*Incorrect parameter entered!
Value must be in the range 0-100
GETBRIGHTNESS
Get picture brightness
value.
no parameter #*THE BRIGHTNESS VALUE : ...