Kimex 163-4335, Руководство пользователя

Страница: 42 / 70

English - 41 -
SETWIFIAPSECURITY-
TYPE
sets the security type of
access point. The value
should be "none" or
"WPA2-PSK"
string n (‘none’ or ‘WPA2-
PSK’ note: string is case
insensitive)
#*Error! Security Type can not be
changed when Access Point is
active
or
#*Error! Security type parameter
should be given
or
#*Error! Security type parameter
is invalid
or
#*Security Type is set to (<TYPE>)
succeeded
GETWIFIAPSECURITY-
PASSWORD
returns the password of
access point
no parameter
#*Current stored Wifi AP Password
is (<PASSWORD>)
SETWIFIAPSECURITY-
PASSWORD
sets the password of
access point. Password
must be maximum 64
characters
string n (example:
‘Password1234’ )
#*Error! Security Password can not
be changed when Access Point
is active
or
#*Error! Password length should
be between 8 and 63 characters
or
#*Setting Wifi AP Password
(<PASSWORD>) succeeded
GETWIFIAPSTATE
returns the access point
state ‘active’ or ‘not
active’
no parameter #*Wifi Access Point is (<STATE>)
SETWIFIAPSTATE
sets the access point
state. State should be
‘off’ or ‘on’
string n ( ‘on’ or ‘off’ note:
string is case insensitive)
#*Error! Access Point state
parameter is invalid
or
#*Access Point state is already
(<STATE>)
or
#*Setting Wifi AP state (<STATE>)
succeeded
GETWIFIAPCHANNEL
returns the stored
channel of the wifi
access point
no parameter
#*Current stored Wifi AP Channel
is (<channel>)
SETWIFIAPCHANNEL
sets the channel of the
wifi access point
n (integer channel) -
(Channel number should
be valid for current country.
If invalid channel number
is given all valid channel
numbers will be listed.)
#*Setting Wifi AP Channel
(<channel>) succeeded
or
#*Wifi AP Channel is already
(<channel>)
or
#*Error! Invalid channel. Available
channels for your country
(<country name>) are: <all
available channels separated with
space>
GETWIFIAPTXPOWER
returns TX Power for wifi
access point
no parameter
#*Current Wifi AP TX Power is
<tx-power>
SETWIFIAPTXPOWER
sets TX Power for wifi
access point.
n (integer tx power in dBm) -
should be in the range of 0 -
20 dbm (0 for default value)
#*Setting Wifi AP TX Power (<tx-
power>) is successful.
or
#*Wifi AP TX Power is already set
to (<tx-power>)!
or
#*Error setting Wifi Access Point
TX Power (<tx-power>)! TX Power
should be in the range of 0 - 20
dbm (0 for default value)
or
#*Error setting Wifi Access Point
TX Power (<tx-power>)!