Centauri Energy Server
–
User Manual
Model Number - GF-20000-360Vdc-380Vac-3/3
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. |
29
5. Operating Instructions:
5.1 Daily ON/OFF:
→
Click
“
” button or press the “INV ON / INV OFF” button on the panel for the ON/ OFF
operation.
Warning!
•
The operation steps can make the output terminal of the Energy Server voltage.
•
If necessary, please disconnect the connection of the lower load and then paste the warning sign
on the joint of the load.
•
The component with its protective cover plate opened with the tool is the part which the user
cannot operate.
•
Only the maintenance support personnel given the technology license by the company can open
the protective cover plate of Energy Server.
5.1.1 Daily on Steps:
1. Switch ON the output switch of the battery.
2. Switch ON the input switch of the external power (RECTIFIER, BYPASS) of the Energy Server.
3. Switch ON the DC START switch of the Energy Server.
4. Switch ON the RECTIFIER and BYPASS switches of the Energy Server.
Note!
•
All buttons for the user operation involved in the operation steps and LED
display are shown in the "Product Profile".
•
Please carefully read the instructions before conducting any operation, in order
to avoid the personnel injury or equipment damage caused by the improper
operation.
Note!
This step is used to boot the inverter under the complete power-down condition, it
is assumed that the inverter is installed and has passed the debugging by the
engineers, as well as the external power switch has been closed.
