This manual
is f
or
use b
y qualified personnel
onl
y
8.2 Audience
This Installation Guide is intended for any qualified personnel planning to install
the Sol-Ark Hybrid inverterd and related system components. Qualified
personnel have training, knowledge, and experience in:
• Installing electrical equipment
• Applying applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Installing and configuring batteries
• Selecting and using Personal Protective Equipment (PPE)
Servicing of batteries must only be performed or supervised by qualified personnel
knowledgeable of batteries and the required precautions. Keep unqualified person-
nel away from batteries.
No responsibility is assumed by Sol-Ark or KiloVault® for any consequences
arising out of the use of this material.
For information about operating the Sol-Ark Hybrid inverter, see the SOl-Ark Owner’s Guide .
8.1 SOL-ARK Installation
This guide provides explanations and procedures for installing Sol-Ark Hybrid Inverter. Before in-
stalling the Sol-Ark Hybrid inverter, read all instructions and cautionary markings in this Guide. For
information about operating the Sola-Ark Hybrid inverter, see the Sol-Ark users Manual.
NOTE
Obtain all necessary permits prior to starting the installation.
Installa-
tions must meet all local codes and standards.
Installation of these
equipment should only be performed by skilled personnel such as quali-
fied electricians and Certified Renewable Energy (RE) System installers.
WARNINIG
HEAVY EQUIPMENT
The Sol-Ark Hybrid inverter weighs approximately 120lbs. A two-person
lift is required. To prevent injury, always use proper lifting techniques
during installation.
JUNE 2022 / Rev: 1.0
2022
45