Part
Quantity
59 in (1.5 m) HAB™ CAN Bus cable.
1 each
59 in (1.5 m) RJ45 HAB™ to inverter Mod-bus cable
1 each
RJ45 120 Ω Resistor Plug
1 each
Wall Mounting Plate
1 each
M8*30 Expanding Screw
10 each
M8*16 mm Bolt
2 each
PG21 (1.1 in, 28 mm) Strain Relief
2 each
PG42 (2.1 in, 28mm) Strain Relief
1 each
Optional Vented Side Plates
4 each
4.3. Tools, Materials, and Safety Equipment Required
for Installation
• Personal protective equipment, including but not limited to, safety glasses, insulated gloves,
and protective footwear
• Lift equipment capable of lifting and supporting at least at least 230 lb (105 kg)
• Drill and drill bit for drilling pilot holes for the mounting plate
• If you will be mounting onto concrete or masonry, you will need a 12 mm drill bit for the in-
cluded M8*30 expansion screws
• Conduit and conduit fittings (depending upon local electrical requirements)
• Various sized Phillips and flathead screwdrivers
• Torque wrench and sockets
• 1/0 battery to inverter cables
• Battery combiner box (when more than one KiloVault® HAB™ batteries are being used)
• Level
• Pencil or marker
This manual
is f
or
use b
y qualified personnel
onl
y
Rev: 5.0
18
HAB Inst/UserManual REV5.0.indd 18
HAB Inst/UserManual REV5.0.indd 18
10/10/22 3:46 PM
10/10/22 3:46 PM
