25
9-3.3. Barcode Reader cancels the NS confirmation command. When the workpiece fastening condition is
wrong and NS is set, you can use Barcode Reader to release it.
Use KILEWS bar code
format : CMD.C02 release NS (Nok Stop)
Description:
The NS function has been enabled on the CTDS. When an NS occurs, the screwdriver locks out and cannot
be used.
The operator can use Barcode Reader to scan the prepared command bar code to release it for easy operation.
Warning
1
、
Please use entire set of special BNK series electric screwdriver with KL-CTDS
2
、
The KL-CTDS should be used with KILEWS’s power supply, BNK electric screwdriver and accessories.
KILEWS would not responsible for if it used with a non-KILEWS screwdriver or spare parts for repair
purpose, caused malfunction or poor quality resulting in failure of all guarantees.
3
、
KILEWS shall not be responsible for if used with non-KILEWS screwdriver or power supply on
KL-CTDS and use non-KILEWS original spare parts repair, resulting in KL-CTDS failure or poor quality
resulting in all guarantees of failure.
4
、
Please do not modify the connection ports and contacts to avoid malfunctions or poor quality and
confirm with the KILEWS before you try to change or modify any of them. Please be noted that all the
guarantees will be invalid if you change the ports and contacts without authorization. KILEWS will not
responsible for it.
Electrical specifications of the IO port: INPUT: +48V, OUPUT: +48V/0.2A.
