TOS8030
Maintenance and Calibration 45
Chapter 8
Maintenance and Calibration
Describes the maintenance and calibration of the tester. The tester must be periodi-
cally inspected, maintained, and calibrated to maintain performance.
8.1
Cleaning the Tester
• Always turn the POWER switch off before cleaning.
• Do not use volatile solvents such as thinners or benzine. They may dis-
color the tester surface coating, dissolve printed characters, or cause
other problems.
If the panel becomes dirty, moisten a piece of soft cloth with a diluted mild deter-
gent and gently wipe the panel.
8.2
Inspection
Power cord
Check that the cover is free of breaks and cracks and that the plug is free of cracks
and looseness.
High-voltage test leads
Check that the covering is free of breaks and cracks. Check for broken wires in the
test leads using a tester or other device.
• A broken wire or breaks or cracking in the wire covering poses the risk of
electric shock. If any such defect is observed, immediately stop using the
power cord and/or test leads.
Please contact your Kikusui distributor or agent to purchase accessories.
8.3
Calibration
The TOS8030 tester is calibrated appropriately on shipment from the factory. How-
ever, the tester should be calibrated after long-term usage.
• The tester generates voltages as high as 3 kV. Because internal inspec-
tion, parts replacement, and calibration is extremely hazardous, all such
work should be performed by Kikusui service personnel.
CAUTION
WARNING
WARNING
Содержание TOS8030
Страница 55: ......
