Kikusui PWX750ML, Руководство пользователя

Страница: 37 / 110

PWX
37
CONFIG Settings
Basic Functions
2
Setting and viewing CONFIG parameters
CF00, CF33, and CF34 are used to execute operations. CF35 to CF41, CF50, and CF51 are
used to display the status of the PWX750ML. You cannot set the values of any of these CON-
FIG parameters.
The SET key blinks when you have selected a CONFIG parameter whose setting you must
confirm by pressing SET (CF00, CF33, or CF34).
Specifying the CONFIG settings
(Excluding resetting the settings, reset-
ting the LAN interface settings, and restarting the LAN interface)
1
Press CONFIG.
The CONFIG key lights, and the SET key blinks. The ammeter displays the parameter
number—CF00
. The voltmeter displays the corresponding setting—
rST .
2
Press CONFIG or turn the CURRENT knob to select the number of the
parameter that you want to set.
When you press CONFIG, the PWX series switches between the parameter numbers
in the following order.
CF00
→
CF20
→
CF30
→
CF50
→
CF60
→
measured value display
When you turn the CURRENT knob, the PWX750ML switches between the parameter
numbers. The parameter numbers that are displayed are those within the ranges
defined by the parameter numbers that pressing the CONFIG key switches between.
CONFIG key
CONFIG key
CONFIG key
CONFIG key
CF00
CF01
CF17
CF20
CF21
CF25
CF30
CF31
CF42
CF50
CF51 CF60
VOLTAGE knob
Used to select the
value or the parameter
to display.
CONFIG key
Used to select the
parameter number.
CURRENT knob
Used to select the
parameter number.
Measured value display
System settings
Interface settings
LAN
(CF20: LAn)
USB
(CF20: uSb)
RS232C
(CF20: 232)
CURRENT knob
Interface-specific
settings
CURRENT
knob
CURRENT
knob
. . .
. . .
. . .
Memo
Press CONFIG or turn the
CURRENT knob to switch
between the parameter
numbers. These two
methods switch between
the parameter numbers
differently.