background image

A

Page 3 / 28

Datasheet 1.10-65.020-01-EN

RPW301-FTL

Product Description

Issue 2017-12-20 from V3.02

Important Information on Product Safety

Safety instructions

This data sheet contains information on installing and commissioning the product “RPW301-FTL”. 
Read this product description prior to installation, commissioning or operation.  No previous special 
knowledge is required to commission and operate this product.
If you have any questions that are not resolved by this data sheet, you can obtain further information 
from the supplier or manufacturer.
If the product is not used in accordance with this data sheet, intended use could be impaired.
Unauthorized conversion and modifications to the device are not permitted for safety reasons and will 
result in the loss of all claims against the manufacturer.
The applicable local regulations must be observed when installing and using the device.

Meaning of the icons

WARNING

Indicates a hazard of medium risk which can result in death or severe bodily injury if it is not avoided.

!

CAUTION

Indicates a hazard of medium risk which can result in material damage or malfunctions if it is not 
avoided.

NOTE

Indicates additional information that can simplify the work with the product for you.

Notes on disposal

In accordance with the applicable laws and directives of the European Union countries, the product 
should not be disposed of with household waste. This ensures environmental protection and 
sustainable recycling or raw materials.  

Private users

 should contact their local retailer or their local authority for information regarding 

environmentally safe recycling of old appliances.

Commercial users

 should contact their supplier and observe the conditions of the purchase 

agreement. This device may not be disposed of together with other commercial waste.

Содержание RPW301-FTL





























Отзывы: