KidKraft BOULDER STATION Скачать руководство пользователя

Страница: 17 / 100

MODEL NUMBER:

F23890

STOP

Step 1: Inventory Parts - Read This Before Starting Assembly

• Please refer to Page 6 for proper hardware assembly.

• Each step indicates which bolts and/or screws you will need for assembly, as well as

any flat washers, lock washers, t-nuts or lock nuts.

This is the time for you to inventory all your hardware, wood and accessories,

referencing the parts identification sheets. This will assist you with your assembly.

• The wood pieces will have the four digit key number stamped on the ends of the

boards. The wood pieces are referenced throughout the instructions with this number.

CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 4)

CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 5)

CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 6)

CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 1)

CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 2)

CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 3)

TRACKING NUMBER (from ID Plaque):

If there are any missing or damaged pieces or you need assistance with

assembly please contact the consumer relations department directly. Call us

before going back to the store.

Read the assembly manual completely, paying special attention to ANSI warnings;

notes; and safety/maintenance information.

Before you discard your cartons fill out the form below.

• The carton I.D. stamp is located on the end of each carton.The tracking number is

located on the KidKraft ID Plaque (9320374).

• Please retain this information for future reference. You will need this information if you

contact the Consumer Relations Department.

+31 20 305 8620

[email protected]
For online parts replacement visit
https://parts.kidkraft.eu/

1.800.933.0771 or 972.385.0100
[email protected]
[email protected]
For online parts replacement visit
https://parts.kidkraft.com/

Содержание BOULDER STATION





































































































Результаты поиска

Содержание BOULDER STATION

Отзывы:

Похожие инструкции для BOULDER STATION

Бренды по названию

Популярные бренды

KidKraft BOULDER STATION, Инструкция по установке и эксплуатации

Результаты поиска

Содержание BOULDER STATION

Отзывы:

Похожие инструкции для BOULDER STATION

Бренды по названию

Популярные бренды