manualshive.com logo in svg

Kidde Fire Protection ANTARES, Руководство пользователя

Поделиться
Скачать
Kidde Fire Protection ANTARES Скачать руководство пользователя страница 45

TM0064

Page 45 of 91

Issue 2.01

TUE 15 MAR 21:45 MESSAGE HANDLER
                  REFER TO REMOTE COMPUTER

Fig 1.1.6.3

TUE 15 MAR 21:45 LOAD/SAVE PROGRAM DATA

REFER TO REMOTE COMPUTER

Fig 1.1.6.4

The complete set of menu options are described in Sections 3.2,  3.3 and  3.4 for Menu 2 and
Menu 3 respectively.

3.2

MENU ONE OPTIONS

To enter any menu the panel must be in the ACCESS mode as described in Section 1.1.1. 
Menu level one can now be entered by pressing any key on the keypad.  On pressing a key the
first option will be displayed.

To scroll through the options press the CANCEL key.
To select the option press the ENTER key.
Seven options are available:

1.

Isolate devices

2.

Set time

3.

List loop devices

4.

List isolated devices

5.

Select test mode

6.

LED test

7.

Printer status- only displayed if configured

The seven options are described in the following sections

Isolate Devices

3.2.1 Isolate Devices

TUE 15 MAR 21:45 ISOLATE A DEVICE

Fig 3.2.1

With the display as indicated above the ISOLATE DEVICES mode can be entered by
pressing the ENTER/YES key.  The display will immediately indicate the single device select
mode, as in fig 3.2.2.

Содержание ANTARES




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды