KIC start, Руководство пользователя

Страница: 37 / 57

Version 1.1.0.x KICstart
30 KICstart User Manual
Zone length, Minimum and Maximum Temperature settings
If you typed a new oven
name, the
KICstart software
also requires you to enter
the length of each zone as
well as the minimum and
maximum zone temperature
settings.
For wave solder processes
you are required to enter the
distance from the end of the
last preheat zone to the
beginning of the main wave.
Enter this value in the field
labeled
Distance from end
of last preheat zone to the
main wave
.
Once you have finished
entering this information
select the
Forward Arrow
button to continue.
Connecting the Air TC
The next screen shows directions for
attaching the
Air TC to your product. It is
important to follow these instructions.
The
Air TC starts and stops the profile
automatically, measures the oven, and
provides useful profile information.
In certain processes it may be beneficial to
wrap the end of the
Air TC with tape to give
it more surface area. KIC recommends
wrapping the
Air TC when profiling:
•
Wave Solder.
•
Anytime IR heat is present.
In addition to the instructions given, it is very important that you position the “Air TC” so that it
rides through the wave(s). The “Air TC must pass through the wave in order to provide accurate
profile results. If you're profiling a Wave Solder machine with the wave off, the Air TC position is
not critical to the profile results.
Select the
Forward Arrow button to continue.