KIC start, Руководство пользователя

Страница: 21 / 57

Version 1.1.0.x KICstart
14 KICstart User Manual
Entering Oven Recipe
The recipe information is:
Number of Zones – Enter in
number of heated zones in
your oven.
Top and Bottom Setpoints
are the Same
– If your
settings always have the top
and bottom setpoints the
same, check this. The
bottom setpoint will
automatically be entered as
you enter the top setpoint.
Different top and bottom
setpoints
The software gives you the
ability to enter separate top
and bottom zone setpoints,
and have them displayed on
the graph.
During the
Run a Profile
routine, when you get to the
screen where you enter in the zone setpoints, there is a check box for
Top and Bottom Setpoints are the
same . Deselect that checkbox if you are running different top and bottom setpoints. Either way, using the
same or different top and bottom setpoints, the graph will always display a top and bottom setpoint values.
Zone Temperature fields – You will have a field for input of the temperature setting for each zone based
on the Number of Zones you enter at the top. For more than six zones you will have to scroll over to enter
the temperatures.
Conveyor Speed – Enter the Conveyor speed that your oven is curretnly set at.
Instructions on Attaching TCs
The next few screens visually demontrate attaching the thermocouples to the board.
It is very important that you attach the first thermocouple (
Air TC ) so it extends 1 inch in front of the
leading edge of the board.
This Air Thermocouple MUST be plugged into the first channel on the KICstart.
Attach the rest of the thremocouples and plug them into the
KICstart . Order is not important, unless you
plan on labeling where they are attached.
Depending on the selected
Application type, the displayed graphics may differ. In any case, always follow
the on-screen directions. Contact KIC Technical support for assistance, tech@kicmail.com .