Kia LNN2010EWUM, Руководство пользователя

Страница: 75 / 80

75
Before thinking the product has malfunctioned
1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device.
2. If you are having problems with the device, try the suggestions listed below.
3. If the problems persist, contact your dealer.
Problem Possible Cause
There are small red, blue, or green dots
on the screen Because the LCD is manufactured with technology requiring high point density, a pixel or lighting
defi ciency may occur within 0.01% of total pixels.
The sound or image is not working • Has the Switch for the vehicle been turned to [ACC] or [ON]?
• Has the SYSTEM been turned OFF?
The screen is being displayed but
sound is not working • Has the volume been set to a low level?
• Has the volume been muted?
When the power is turned on, the
corners of the screen are dark • The display appearing somewhat dark after prolonged periods of use is normal with LCD panels.
It is not a malfunction.
• If the screen is very dark, contact your nearest dealer for assistance.
Sound is working from only one
speaker Are the positions of Fader or Balance sound controls adjusted to only one side?
Sound does not work in AUX mode Are the audio connector jacks fully inserted into the AUX terminal?
The external device is not working Is the external device connected with a standard connector cable?
When turning power on, the most
recent mode screen is not displayed Within modes that play fi les by reading external sources, such as discs, USB, iPod, or Bluetooth®
streaming mode, the most recently played mode screen prior to turning off power may not
properly load.
• If there is no disc or the corresponding device is not connected, the mode operated prior to the
most recent mode will operate.
• If the previous mode still cannot be properly played, the mode operated prior to that will
operate.