EMA -70
ENGINE MECHANICAL SYSTEM
2)
Stop after the ring compressor pops free, and
check the connecting rod-to-check journal align-
ment before pushing the piston into place.
3)
Apply engine oil to the bolt threads. Install the
rod caps with bearings, and torque the bolts.
Tightening torque
19.6Nm (2.0kgf.m, 14.46lb-ft) + 90
Use SST(09221-4A000), install connecting rod
bearing cap bolts.
09221 - 4A000
KDRF225A
NOTE
•
Always use new connecting rod bearing cap bolt.
•
Maintain downward force on the ring compressor
to prevent the rings from expanding before enter-
ing the cylinder bore.
ECKD001F
11. Check the connecting rod end play.
12. Install oil drain cover.
Tightening torque
9.80 ~ 11.76Nm (1.0 ~ 1.2kgf.m, 7.23 ~ 8.67lb-ft)
A
KDRF209A
NOTE
•
Make clean the sealing face before assembling
two parts.
•
Remove harmful foreign matters on the sealing
face before applying sealant
•
Be assembling oil drain cover, the liquid sealant
TB1217H should be applied oil drain cover.
•
The part must be assembled within 5 minutes
after sealant was applied.
•
Apply sealant to the inner threads of the bolt
holes.
ECBF003A
www.CarGarage.ir
www.CarGarage.ir
www.CarGarage.ir
