Kia 2019 niro, Руководство пользователя, Страница: 512 / 551

Maintenance
70 8
Appearance care
The National Highway Traffic Safety
Administration has warned all vehi
-
cle owners of all brands of the need
to take the following steps:
䳜 Wash the undercarriage of your
vehicle regularly during the winter
and whenever your vehicle has
been exposed to such salts or
chemicals.
䳜 Do a thorough washing of the
undercarriage at the end of the
winter.
䳜 Use professional service techni
-
cians or governmental inspection
stations to annually inspect for
corrosion.
䳜 Immediately seek an inspection of
your vehicle if you become visu
-
ally aware of corrosion flaking or
scaling or if you become aware of
a change in vehicle performance,
such as soft or spongy brakes,
fluids leaking, impairment of
directional control, suspension
noises or rattling metal straps.
Aluminum wheel maintenance
The aluminum wheels are coated
with a clear protective finish.
䳜 Do not use any abrasive cleaner,
polishing compound, solvent, or
wire brushes on aluminum
wheels. They may scratch or
damage the finish.
䳜 Clean the wheel when it has
cooled.
䳜 Use only a mild soap or neutral
detergent, and rinse thoroughly
with water. Also, be sure to clean
the wheels after driving on salted
roads. This helps prevent corro
-
sion.
䳜 Avoid washing the wheels with
highspeed vehicle wash brushes.
䳜 Do not use any alkaline or acid
detergents It may damage and
corrode the aluminum wheels
coated with a clear protective fin
-
ish.
Corrosion protection
Protecting your vehicle from corro
-
sion
By using the most advanced design
and construction practices to com
-
bat corrosion, we produce vehicles
of the highest quality. However, this
is only part of the job. To achieve
the long-term corrosion resistance
your vehicle can deliver, the owner's
cooperation and assistance is also
required.
Common causes of corrosion
The most common causes of corro
-
sion on your vehicle are:
䳜 Road salt, dirt and moisture that
is allowed to accumulate under
-
neath the vehicle.
䳜 Removal of paint or protective
coatings by stones, gravel, abra
-
sion or minor scrapes and dents
which leave unprotected metal
exposed to corrosion.