Kia 2019 niro, Руководство пользователя, Страница: 241 / 551

97
5
5
Features of your vehicle Lighting
- When only part of the vehicle in
front is visible on a crossroad or
curved road.
- When there is a traffic light,
reflecting sign, flashing sign or
mirror ahead.
- When there is a temporary
reflector or flash ahead (con
-
struction area).
- When the road conditions are
bad such as being wet, iced or
covered with snow.
- When a vehicle suddenly
appears from a curve.
- When the vehicle is tilted from
a flat tire or being towed.
䳜 When front visibility is poor
- When the lamp of the on-com
-
ing or front vehicle is covered
with dust, snow or water.
- When the light from a vehicle is
not detected because of
exhaust fume, smoke, fog,
snow, etc.
- When the front window is cov
-
ered with foreign substance.
- When it is hard to see because
of fog, heavy rain or snow and
etc.
NOTICE
䳜 Do not disassemble a front view
camera temporarily for tinted
window or attaching any types of
coatings and accessories. If you
disassemble the camera and
assemble it again, take your vehi
-
cle to an authorized Kia dealer
and have the system checked.
䳜 When you replace or reinstall the
windshield glass, take your vehicle
to an authorized Kia dealer and
have the system checked.
䳜 Be careful that water doesn't get
into the High Beam Assist unit
and do not remove or damage
parts of the High Beam Assist
system.
䳜 Do not place objects on the dash
board that reflect light such as
mirrors, white paper, etc. The
system may not be able to func
-
tion if sunlight is reflected.
䳜 At times, the High Beam Assist
may not operate due to system
limitations. The system is for
your convenience only.
It is the responsibility of the driver
to drive safely and always check
the road conditions.
䳜 When the system does not oper
-
ate normally, change the lamp
position manually between the
high beam and low beam.