Kia 2019 niro, Руководство пользователя, Страница: 364 / 551

Driving your vehicle
80 6
Blind-Spot Collision Warning
onds on the outer side view
mirror.
䳜 If the vehicle is turned off then on
again, the system maintains the
last setting.
Setting the warning volume of the
Blind-Spot Collision Warning
The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting
䳜 Go to the 'User Settings → Driver
Assistance → Warning Volume →
High/Medium/Low'.
For more details, refer to "LCD dis
-
play" on page 5-53.
NOTICE
If you change the warning volume,
the warning volume of other sys
-
tems may change. Always be aware
before changing the warning vol
-
ume.
Operating Conditions
The system enters the ready sta
-
tus, when 'Active Assist' or 'Warning
Only' is selected and the following
conditions are satisfied:
Active Assist
The Blind-Spot Collision-Avoidance
Assist system will activate when:
䳜 Vehicle speed is between 40 mph
and 110 mph (60 km/h and 180
km/h).
䳜 The system detects both of the
lane lines.
䳜 An approaching vehicle is
detected next to or behind your
vehicle.
The Blind-Spot Collision Warning
system will activate when:
䳜 The vehicle speed is above
approximately 20 mph (30 km/h).
Warning Only
The Blind-Spot Collision Warning
system will activate when:
䳜 The vehicle speed is approxi
-
mately 20 mph (30 km/h).
* The Blind-Spot Collision-Avoid
-
ance Assist system is not acti
-
vated when "Warning Only" is
selected.