Kia 2019 niro, Руководство пользователя, Страница: 232 / 551

Features of your vehicle
88 5
Parking distance warning
Non-operational conditions of
parking distance warning
parking distance warning may not
operate normally when:
䳜 Moisture is frozen to the sensor.
(It will operate normally when
moisture melts.)
䳜 Sensor is covered with foreign
matter, such as snow or water, or
the sensor cover is blocked. (It will
operate normally when the mate
-
rial is removed or the sensor is no
longer blocked.)
䳜 Sensor is stained with foreign
matter such as snow or water.
(Sensing range will return to nor
-
mal when removed.)
䳜 The parking assist button is off.
There is a possibility of parking dis
-
tance warning malfunction when:
䳜 Driving on uneven road surfaces
such as unpaved roads, gravel,
bumps, or gradient.
䳜 Objects generating excessive
noise such as vehicle horns, loud
motorcycle engines, or truck air
brakes can interfere with the
sensor.
䳜 Heavy rain or water spray.
䳜 Wireless transmitters or mobile
phones present near the sensor.
䳜 Sensor is covered with snow.
Detecting range may decrease
when:
䳜 Outside air temperature is
extremely hot or cold.
䳜 Undetectable objects smaller than
4 in (1 m) and narrower than 5.5
in (14 cm) in diameter.
The following objects may not be
recognized by the sensor:
䳜 Sharp or slim objects such as
ropes, chains or small poles.
䳜 Objects, which tend to absorb
sensor frequency such as clothes,
spongy material or snow.
NOTICE
1. The warning may not sound con
-
sistently depending on the speed
and shapes of the objects
detected.
2. The parking distance warning
may malfunction if the vehicle
bumper height or sensor installa
-
tion has been modified. Any non-
factory installed equipment or
accessories may also interfere
with the sensor performance.
3. Sensor may not recognize objects
less than 12 in (30 cm) from the
sensor, or it may sense an incor
-
rect distance. Use with caution.
4. When the sensor is frozen or
stained with snow or water, the
sensor may be inoperative until
the stains are removed using a
soft cloth.
5. Do not push, scratch or strike the
sensor with any hard objects that
could damage the surface of the
sensor. Sensor damage could
occur.