3
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Toggle
®
Tables - Triple Motor C-Leg Height-Adjustable Square Shoe Base, Model SS
Assembly Instructions
Figure 3
corner leg
column
square
shoe foot
foot
plate
square shoe
end-support
tube
M6 x 35
socket head
cap screw
middle-support
bracket
(left-hand)
M8 x 12
button-head
machine screws
adjustable
glide
middle-support
bracket
(right-hand)
cross-support
tubes (short)
cross-support
tubes (short & long)
leg-to-leg
spanners
(short)
leg-to-leg
spanners
(long)
M8 x 12
button-head
machine screw
M6 x 35
socket head
cap screw
end
C-Leg
end
C-Leg
USER
SIDE
USER
SIDE
M8 x 12
button-head
machine
screw
leg
column
M8 x 12
button-head
machine screws
middle-support
brackets
middle-support
bracket
flange
Detail D
adjustable
glide
#10-24 x /
Torx head
screws
3
8
"
foot
non-locking
caster
locking
caster
Detail E
Corner Leg Assembly
Note:
Middle-support brackets are
left- and right-handed. Brackets are
each designed to install to a specific
side of the corner leg column.
Take care and follow directions
below when installing brackets.
If brackets are not installed to the
proper left- or right-hand location,
corner leg column will not secure to
the brackets and disassembly and
reassembly will be required.
1. Orient and place each
middle-support bracket over the
cross-support tube assembly
with flange facing the corner leg
installation location
as illustrated.
Align the holes of the middle
support bracket with the support
tube mounting holes and secure with
four M8 x 12 button-head machine
screws (Figure 3).
2. Place the square shoe
end-support tube between the two
cross-support tube assemblies as
illustrated in Figure 3.
3. Position the corner leg column over
the square shoe end-support tube
and two middle-support bracket’s
flanges, then align six mounting
holes of the leg column with
appropriate mounting holes of the
two brackets and tube as illustrated
in Figure 3 and Detail D. Using
six M8 x 12 button head machine
screws torqued to 9.5 ft/lb, secure
the flange of the leg column to the
square shoe end-support tube and
middle-support brackets (Figure 3 &
Detail D).
4. Assemble the square shoe foot to
the leg column by first positioning a
plastic foot plate over the mounting
location on the leg column. The foot
plate must be oriented so the raised
flange faces into the column, to
nest the foot plate into place. Next,
position the square shoe foot over
the foot plate and leg column as
illustrated, with the mounting holes
of the foot aligning with those of the
leg column. Secure the foot to the
leg column with four M6 x 35 socket
head cap screws. Torque to
7.5 ft/lb (Figure 3).
5. If casters are required, twist all
adjustable glides out of the square
shoe and C-leg feet. Locking and
non-locking casters are supplied.
Locking casters should be located
toward the front, user side of the
table for easy access while the
non-locking casters are located to the
back. Using four #10-24 x
3
/
8
” Torx
screws, carefully secure the casters
to the foot (Detail E).
