KI ROGUE 2, Техническое руководство

Страница: 49 / 58

48
Seat Height Adjustment
Rear Seat Height
Rear seat height can be adjusted by repositioning upper base mounts.
1. Remove your wheels by depressing the buttons on the quick release axle. For easier access, flip the
chair upside down.
2. Use a 4mm Allen wrench to remove the two bolts (D), two washers and two square nuts (A) per upper
base mount.
3. Reinstall the hardware in the new desired seat height hole on the upper base mount.
4. Repeat on both sides of the wheelchair.
5. When the desired height is reached, tighten the bolts (D) to 70 in/lbs.
NOTE: Height adjustments are in ¼" increments.
NOTE: A front caster adjustment should be made to correspond with any change in seat angle.
Front Seat Height
The front seat height can be adjusted in ½" increments by repositioning the caster wheel within the fork.
1. Use two 4mm Allen wrenches to remove the cap screws and push the internally threaded axle from one
hole location and move up or down to the desired location.
2. Reposition the two 6mm screws and tighten to 80 in./lbs.
3. Resquare caster wheels.
D
A
B
C
D