KI ROGUE 2, Техническое руководство

Страница: 48 / 58

47
Center of Gravity Adjustment
You can adjust your center of gravity by moving the two rear tower index clamps (A) forward or rearward
on the seat tube (B). Moving the rear tower index clamps forward shortens the wheelbase and lightens the
front end, making your chair more maneuverable. Moving the rear tower index clamps rearward makes the
chair more stable and less likely to tip over rearward.
NOTE: Changes to the center of gravity may affect the rear seat height, toe-in/toe-out of the rear
wheels and the squareness of the casters. If you change your center of gravity position, readjust all
of these settings as necessary.
NOTE: Adjusting your chair’s center of gravity will require readjusting the location of the wheel locks
(if provided). See the Wheel Lock section for instructions on adjusting the wheel locks.
To adjust the center of gravity location:
a. Remove both rear wheels.
b. Loosen the two bolts at the top of the rear index clamps on both sides of the chair using a 4mm
Allen wrench.
c. Slide the rear index clamps and assemblies along the frame to the desired position.
d. Ensure the rear index clamps on both sides of the frame are adjusted equally on both sides of the
frame before retightening the clamps.
e. Once the rear index clamps are secured, attach the rear wheels, occupy the chair and maneuver it
with a spotter to get a feel for the new adjustment.
A
B
A