9
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Pirouette Tables™ Nesting-Base with Villa, PowerUp or No Power - Back-to-Back Ganging
Assembly Instructions
Figure 14 - Nesting-Base Tables with Back-to-Back Ganging
peg
ganging hook
(engaged)
peg
(for storage)
first table
second table
#14 x 1 / ”
1
2
wood screw
peg
(for storage)
ganging
hook
Back-to-Back Ganging, Pirouette
Nesting-Base Tables
Note:
Take note of the correct
orientation of ganging hooks and peg
mounting locations to assure proper
latching for back-to-back ganging
(Figure 14).
1. Carefully turn tables to the upright
position. As illustrated, and based on
the table depth, install two hooks to
the first table using two pegs and
#14 x 1
1
/
2
” wood screws for
back-to-back ganging of two tables.
Next, install four pegs at the other
illustrated locations on the first table
for future use to store ganging hooks
(Figure 14).
2. At the second table, install two pegs
inline with the first set of pegs with
installed ganging hooks and four
pegs for future use to store ganging
hooks (Figure 14).
3. Move tables together and swing the
ganging hooks of the first table to
securely engage the pegs under the
second table (Figure 14).
CAUTION:
If Channels (Wire Troughs)
are used they are not to be used for routing
extension cords. Power supply cords are
not to be routed across or through more
than one complete unit/tabletop.
WARNING:
Assembly of all table
components must be completed before
making any electrical connections. All
electrically connected furnishings must
also be mechanically connected.
