KI Enlite ENBT AD Series, Руководство по сборке

Страница: 8 / 12

6
Enlite Tables
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Power/Data Module
(PowerUp
®
)
Tables may be ordered with one or
two power/data modules. Theses
tables come equipped with the clear
vertical leg wire managers.
1. After completing table
assembly, and with the table
right side up, insert the
power/data module cord
through the hole in the work
surface (from above) and press
the power/data module into the
hole (Figure 10).
2. Secure the power/data module
to the table top with two spacer
clips and #8 Phillips head
screws (two screws per clip)
(Figure 11).
3. Route the module cord and/or
optional data lines to the clear
vertical wire managers at one or
both table legs (Figure 12).