KI Enlite ENBT AD Series, Руководство по сборке

Страница: 6 / 12

4
Enlite Tables
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
ACCESSORIES
Clear Plastic Vertical Leg Wire
Manager
Clear plastic vertical leg wire
managers come in pairs and may
be assembled onto different legs or
onto each upright on one leg.
1. Press one end of the wire
manager over one of the leg
uprights. Then, complete
snapping on the wire manager
by working it over the upright to
the other end (Figure 7).
An optional , more permanent
installation requires attaching
the leg wire manager to the leg
with #8 Torx screws. Proceed to
steps 2 & 3.
2. Drill a
1
/
8
”
diameter hole through
the wall between two “barrels”
of the wire manager. Locate the
hole using the groove in the
wire manager’s shared wall and
at a distance from the end of the
manager for the desired height
up the leg tube (Detail D).
3. Secure the wire manager to the
pre-drilled leg tube hole
using a #8 Torx screw
(Figure 8).