KI Enlite ENBT AD Series, Руководство по сборке

Страница: 7 / 12

Enlite Tables
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
5
Leg End Panel
End panels are pre-installed on
the legs at the factory but may be
ordered separately.
1. From the middle of the table,
insert narrow end of panel
between the leg tubes
(Figure 9).
2. Line up the five holes in the
end panel with the mounting
holes in the leg tubes.
3. Secure the end panel in place
using five #25 Torx screws.
4. Repeat for other leg.