2
Enlite Tables
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
STANDARD HEIGHT TABLES
Note:
See page 3 for ADA
wheel chair height tables.
1. Carefully place table top upside
down on a soft protective
surface.
2. Line up bases with pre-drilled
holes (Figures 3 & 4).
Note:
The longer side of the
attachment plate always faces
towards the center of the table.
3.
For “T” & “Y” legs
, secure
legs to table top using eight or
ten #12 x
3
/
4
” Phillips
pan head screws per leg
(Figures 3 & 4).
Note:
Screws are not required
in the holes closest to the the
leg tubes (Detail A).
For Post leg (Boomerang &
Scale-up tables)
, secure leg
to table top using ten #12 x
3
/
4
”
Phillips pan head screws per
leg (Figure 4).
4. Screw casters or optional
glides into threaded leg tubes.
(Figures 3 & 4).
Note:
For “T” & “Y” legs,
locking casters should be
installed on user’s side of table
(Figures 3, 4 & Detail B). For
Post legs, use non-locking
casters only (Figure 4).
5. Tighten casters using
3
/
4
”
open
wrench. Turn optional gliders
until about
1
/
2
”
of telescoping
shroud material remains visible.
Содержание Enlite ENBT AD Series
Страница 1: ...Assembly Instructions Enlite Tables March 2017...
Страница 2: ......
Страница 11: ...Enlite Tables Assembly Instructions 9...