Ki Mobility Little Wave Clik XP, Инструкция пользователя и гарантия

Страница: 13 / 120

11
IV. WARNINGS
J. Modifying your Wheelchair
Your wheelchair was engineered and manufactured under strict design controls. An integral
part of this process is ensuring the various components work together correctly; they have
been tested to various standards to ensure quality and are approved to work together.
YOU SHOULD NOT CHANGE, ADD OR REMOVE COMPONENTS OR OTHERWISE MODIFY
THIS WHEELCHAIR. NO ONE SHOULD MODIFY THIS WHEELCHAIR EXCEPT BY
ASSEMBLING APPROVED OPTIONS. THERE ARE NO APPROVED OPTIONS THAT INVOLVE
DRILLING OR CUTTING THE FRAME BY ANYONE OTHER THAN A TRAINED KI MOBILITY
ASSOCIATE. Contact Ki Mobility or an authorized Ki Mobility supplier before adding any
accessories or components not provided by Ki Mobility.
DANGER: Failure to comply to these instructions may cause the wheelchair to fail and result
in serious injury or death.
K. Wheelchair Stability
To ensure proper stability of your wheelchair, you must make sure the center of gravity and the
wheelchairs base of support is correct for your balance and abilities. Many factors can affect
these two elements:
Generally, the most important factor is the position of the rear wheels for rearward stability.
There are other actions than can have an adverse effect on your stability. You should consult
with your wheelchair provider and clinicians familiar with your needs and capabilities in
determining how this affects your use.
WARNING: Moving the rear wheels forward increases the likelihood of the wheelchair
tipping backwards.
Make small adjustments and proceed slowly until you learn the new
balance point of your wheelchair. Failure to comply with the instruction above could result in
serious injury or death.
• Seat height •
Size and position of rear wheels
• Size and position of front casters
• Any seating system components
• Seat depth
• Back angle