Kguard BR1621, Руководство пользователя

Страница: 89 / 116

ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
89
• If you cannot use the either of the two default ports, 80 or 9000, the specified port may be occupied by other
programs or it is being blocked by your service provider. Enter other port number. In this case, you need to
add the port number after the IP address. For example, if you set the
HTTP Port as 85, you need to enter the
IP address as “192.168.3.103:85”.
4
Enter the Mobile Port .
Note:
• The default setting for Mobile Port is 18004. When you are using for mobile application (i.e. KView) to view
multiple channels in real-time through on your mobile device, enter the same port as you specified here.
• The setting range is between 1024 and 65535.
5
Enter other parameter settings (if applicable).
• If your network connection is Static , specify the static IP address, Subnet Mask, Gateway, and DNS 1/DNS 2 IP
addresses.
• If your network connection is PPPoE , enter the User Name and Password that you setup with your DSL service
provider. Then, specify the DNS 1/DNS 2 IP addresses.
Note:
The system supports two DNS server input options: DNS Server1 for main server and DNS Server2 for sub server.
Please contact your local ISP (Internet Service Provider) to obtain the correct DNS Server parameter.
6
To enable Auto Port Forwarding (UPNP) feature, select Enable .
Note:
Not all routers support the Auto Port Forwarding feature. If this function does not work, you must manually open
the ports in your router.
7
After all settings are complete, click Save .
« TIP »
To cancel any modifications and retain the existing settings, click Refresh .