Kguard BR1621, Руководство пользователя

Страница: 55 / 116

ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
55
4.4.2 Remote Stream Setup
The Remote Stream page allows you to enable or disable video output of a particular channel if the channel is being
viewed via remote access.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK , select the Remote Stream tab. The remote stream framerate settings are
displayed on a table.
3
Select the channel and adjust the corresponding settings such as Video , FPS , and Quality .
4
Check the Audio box to enable audio.
5
To copy the current settings to all channels or one specific channel. Click the arrow on Copy and To to select an
option and then click Copy .
6
After all settings are complete, click Apply .
7
When data saving is complete, click OK .
4.4.3 Email Settings
The DVR supports sending of email notifications when events occur, such as when motion is detected or the HDD fails
at the specified channel, day, and time.
Note:
Be sure that the DVR network connection is properly configured before proceeding with the email setup.
To set up email, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > NETWORK , select the Email tab.
3
On Email , select Enable .
4
Click Schedule to implement the email schedule. For details, refer to “Email Schedule Setup” on page 56 .
5
On SSL , select the Enable check box if your email server needs the SSL verification. Check with your email service
provider for the applicable setting.