ENGLISH
Chapter 4: Using the DVR
DVR User’s Manual
53
4.4 Setting the Network
To enable remote monitoring, recording, playing, or configuring the setting via KGUARD Web Client or KView software,
you need to configure the network settings first. Consult your Internet Service Provider (ISP) to determine the type of
network connection you are using and the required parameters to complete the setup.
4.4.1 Network Settings
You can use the Network menu to setup how the DVR connects to the network. It provides three network connection
options: Static IP, DHCP, and PPPoE.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select
Main Menu
>
NETWORK
.
3
On
Type
, select the desired network connection.
• DCHP
: With Dynamic Host Configuration Protocol
(DHCP) service, your router will automatically assign
an IP address to your computer connected to the
network.
•
PPPoE:
The Point-to-Point Protocol over Ethernet
(PPPoE) is a network protocol for encapsulating
Point-to-Point Protocol (PPP) frames inside Ethernet
frames. This network protocol allows the device to
be directly connected using a DSL modem.
• Static IP
: This network protocol allows you to
configure the network interface using a fixed IP
address.
4
Enter the
Mobile Port
.
Note:
• The default setting for
Mobile Port
is 18004. When you are using for mobile application (i.e. KView) to view
multiple channels in real-time through on your mobile device, enter the same port as you specified here.
• The setting range is between 1024 and 65535.
Содержание BR1621
Страница 1: ...USER MANUAL BR421 BR821 BR1621 ...