If your PC is running Windows XP (SP2), Vista or Windows7 and the IC of your Bluetooth adapter is from
•
manufacturer CSR, please use the included and preloaded Microsoft Bluetooth driver software.
You do not need to install other Bluetooth driver software. If you do not like to use the Microsoft Bluetooth
driver software for any reason, you can install optionally Bluetooth driver software Toshiba or BlueSoleil
(from software manufacturer IVT). *
If your PC is running Windows XP (SP2), Vista or Windows7 and the IC of your Bluetooth adapter is from
•
manufacturer CSR, please first install the Bluetooth driver software Toshiba or BlueSoleil (IVT). *
If your PC is running Windows XP (SP2), Vista or Windows7 and the IC of your Bluetooth adapter is from
•
manufacturer Broadcomm, please first install the Bluetooth driver software WIDCOMM.*
* For details, see the documentation of your PC, your built-in Bluetooth module or your Bluetooth adapter.
Advice:
The most Bluetooth keyboards cannot work under BIOS or DOS environment, because the Bluetooth
adapter works only in HID mode (Human Interface Device). For this a dual Bluetooth USB adapter would be
necessary, which supports both HID and HCI mode (Host Controller Interface.
3.2 Usage of rechargable batteries
The KSK-3211 BTM can be used as a wireless keyboard with BT tech-
nology, either with batteries or with rechargeable batteries. With the
enclosed USB cable, the rechargeable batteries can be recharged. It
is not recommended to connect the USB cable to the keyboard while it
operates with non-chargeable batteries, although there is a protection
mechanism for charging non-chargeable batteries. During charging the
right LED is flashing.
4. Handling
After successful launch enjoy now during the operation a free and independent choice of location up to ap-
prox. 7 m distance to the PC. More or less range can be caused, like mentioned above, by metallic dividing
walls, other computer cases, monitors, ZIP drives, loudspeakers, switching power supplies etc., but also by
different loading capacity of the batteries.
4.1 Meaning of status LEDs
Pairing/Re-connection-LED
•
Indicates, that the keyboard is in Pairing-Mode with the USB receiver, in other words the
manual implementation of a new synchronisation to achieve a shared “radio channel” (ID).
The light goes out after successful synchronisation. It also indicates, that during keyboard
or trackball operation all input information have been sent out successfully per radio trans-
mission from the keyboard.
Battery Low-LED
•
Indicates, that the load condition of the batteries is below 2.2 Volt. It flashes until a new
battery has been inserted or until the battery has been completely used up. Besides that it
flashes only when the keyboard is not in Sleep-Mode (idle state).
Recharging-LED
•
Flashes when the batteries are recharged and lights on permanently when the batteries
have reached full charge.
User Manual KSK-3211 BTM
Subject to changes and errors.
12
